Type in your closet’s measurements and this free closet design tool lays out the space for you: how much double hanging, long hanging and shelving fits, how many garments and shoes it holds, and which kind of closet system matches your budget. It works for reach-in and walk-in closets and updates as you type.
Your closet plan
Your layout, section by section
System that fits your budget
Small add-ons that stretch the space
Link copied
Estimates use common closet planning rules (listed below). Costs are typical U.S. ranges, not quotes: prices change and vary by region, so check current prices before you buy.
How the closet planner works
The tool uses the planning rules most closet designers start from. You can use the same numbers to sketch a plan on paper or to check a quote from a closet company.
| Element | Common measurement | Why |
|---|---|---|
| Depth for hanging clothes | About 24″ (22″ minimum) | An adult hanger is roughly 17–19″ wide, plus room so clothes don’t rub the back wall or the doors. |
| Double-hang rods | About 81″ and 40″ from the floor | Two rows of shirts, jackets and folded pants in the same wall space. |
| Long-hang rod | About 66–72″ from the floor | Clears full-length dresses, coats and pants hung by the cuff. |
| Top shelf | 12–14″ deep, about 2″ above the top rod | Deep enough for bins and sweaters without blocking the rod. |
| Shoe shelves | About 7″ apart, 7–9″ of width per pair | Fits most flats and sneakers; leave a taller gap for boots. |
| Walk-in aisle | 36″ minimum, 42″ comfortable | Room to stand, turn and open drawers. |
| Walk-in width for a U-shape | About 84″ (7 ft) | Two 24″ hanging zones plus a 36″ aisle. |
Garment counts assume about 1″ of rod per item on standard plastic or wood hangers and about 0.6″ on slim velvet hangers. Bulky winter coats take 2–3″ each, so treat the numbers as a range, not a promise. Cost ranges match our guide to custom closet costs: they are typical U.S. ranges, not quotes.
Get better results from the tool
- Measure three times. Check the width at the floor, middle and top and use the smallest number. Our closet measuring guide walks through it step by step.
- Measure inside the door frame too. A reach-in with a narrow opening and wide side “returns” has hidden space in the corners that is hard to reach.
- Count what you own. If you have 60 shirts and the plan holds 45, plan for slim hangers or more double hanging before you buy anything.
- Save your plan. The “Copy a link” button keeps your measurements in the link, so you can send it to a partner or a closet company.
FAQ
How much hanging space does one person need?
It depends on the wardrobe, so count what you hang: allow about 1″ of rod per item on standard hangers (about 0.6″ on slim ones) and 2–3″ per heavy coat. Double hanging doubles the rod length in the same wall space, which is why the tool favors it for shirts and pants.
What is the minimum size for a walk-in closet?
A walk-in with clothes on one wall needs about 60″ of width (a 24″ hanging zone plus a 36″ aisle). Hanging on two facing walls needs about 84″. See our walk-in closet layouts for the sizes each layout needs.
Which closet system should I buy?
Wire kits are the cheapest, DIY laminate systems look built-in for a moderate price, and professional custom closets cost the most but are designed and installed for you. Our comparison of wire vs laminate vs wood closet systems covers the trade-offs, and our best reach-in closet systems guide lists options by budget.
Can I use this tool for a closet company quote?
Yes. Copy the link to your plan and share it, or bring the section widths. A designer will still measure on site, but you’ll know whether their layout gives you more or less hanging space than this plan.
